ic sockets axs1 ordering information high reliability ic socket with round pin r ound pin type ic sockets compliance with rohs directive features 1. with advanced design method of the frame, stress transmission from the pc board is greatly reduced. 2. this is a high reliability ic socket with round pin external contacts constructed with 4 point internal contacts. because of the gold plating on all surfaces, the 4 point contact construction offers superior resistance to vibration, shock, and environmental conditions, resulting in high reliability. 3. terminal shape prevents entrance of solder ?x. because of the round pin construction and suf?ient distance being provided between the pc board mounting surface and the frame, ?x cannot rise up into the contact section. construction of contact external sleeve internal contact 10: round pin type ic sockets 1: dil terminal layout, solder dip terminal 2: sil terminal layout, solder dip terminal 7: dil terminal layout, solder dip terminal (24 contacts: row pitch is 7.62 mm) axs 1 0 08: 8 contacts 14: 14 contacts 16: 16 contacts 18: 18 contacts 20: 20 contacts 22: 22 contacts 24: 24 contacts 28: 28 contacts 32: 32 contacts 36: 36 contacts 40: 40 contacts 48: 48 contacts 64: 64 contacts 1: au plating 0.25 m/sn plating 3: au plating 0.76 m/sn plating 7: au plating 0.76 m/au plating 9: sn plating/sn plating panasonic-electric-works.net/ac
ic sockets axs1 product types 1. solder dip terminal type *1 pitch: 15.24mm *2 pitch: 7.62mm note) all are stick packaged. ?sil type produced after order products: supports up to 32 contacts. (minimum order is 1,000 pieces) specifications 1. characteristics 2. materials and surface treatment item economical type (extremely resistant to fretting with ic) general-purpose type (extremely resistant to fretting with ic) high-reliability type (contact resistance is stable even if left unadhered for extended periods.) testing use pac kaging external sleeve sn plating au plating internal contact sn plating au plating (0.25 m) au plating (0.76 m) au plating (0.76 m) type no. of contacts part no. part no. part no. part no. inner carton (stick) outer carton dil 8 axs100819 axs100811 axs100813 axs100817 50 pcs. 300 pcs. 14 axs101419 axs101411 axs101413 axs101417 25 pcs. 300 pcs. 16 axs101619 axs101611 axs101613 axs101617 25 pcs. 300 pcs. 18 axs101819 axs101811 axs101813 axs101817 20 pcs. 300 pcs. 20 axs102019 axs102011 axs102013 axs102017 20 pcs. 300 pcs. 22 axs102219 axs102211 axs102213 axs102217 15 pcs. 300 pcs. 24* 1 AXS102419 axs102411 axs102413 axs102417 15 pcs. 300 pcs. 24* 2 axs102479 axs102471 axs102473 axs102477 15 pcs. 300 pcs. 28 axs102819 axs102811 axs102813 axs102817 15 pcs. 300 pcs. 32 axs103219 axs103211 axs103213 axs103217 10 pcs. 300 pcs. 36 axs103619 axs103611 axs103613 axs103617 10 pcs. 300 pcs. 40 axs104019 axs104011 axs104013 axs104017 10 pcs. 300 pcs. 48 axs104819 axs104811 axs104813 axs104817 8 pcs. 200 pcs. 64 axs106419 axs106411 axs106413 axs106417 5 pcs. 100 pcs. sil 32 axs103229 axs103221 axs103223 axs103227 10 pcs. 100 pcs. item speci?ations condition electrical characteristics rated current 1a breakdown voltage 1,000v ac for 1 min. detection current: 1ma insulation resistance min. 1,000m ? using 500v dc megger contact resistance max. 20m ? measured based on the hp4338b measurement method of jis c 5402 electrostatic capacitance max. 2pf at 1khz mechanical characteristics vibration resistance 10 to 2,000hz, 147m/s 2 {15g} after carrying current (max. 100ma) during the test, no interruption of current longer than 1 s does not occur. shock resistance 980m/s 2 {100g} after carrying current (max. 100ma) during the test, no interruption of current longer than 1 s does not occur. insertion force of single contact max. 3.33n {340gf} measured by a 0.41mm dia. steel gauge with a surface roughness of 0.1 s. pull-out force of single contact min. 0.392n {40gf} measured by a 0.41mm dia. steel gauge with a surface roughness of 0.1 s. insertion and removal life min. 100 times with usage of applicable leads applicable leads square lead: at 0.5 0.1 0.25 0.05 round lead: diameter 0.4 to 0.53mm environmental resistance h 2 s gas contact resistance after test: max. 20m ? after 96 hours of exposure to himidity 75 to 80% r.h., temperature 40 c 2 c, concentration 3 1 ppm so 2 gas contact resistance after test: max. 20m ? after 48 hours of exposure to himidity 90 to 95% r.h., temperature 40 c 2 c, concentration 10 3 ppm humidity contact resistance after test: max. 20m ? insulation resistance after test: min. 300m ? after 96 hours of exposure to himidity 90 to 95% r.h., temperature 40 c 2 c thermal shock resistance contact resistance after test: max. 20m ? insulation resistance after test: min. 300m ? low temperature: ?5 c (30 min.) 1cycle high temperature: +125 c (30 min.) 1 cycle no. of cycles: 5 cycles ambient temperature au plating: ?5 c to +125 c sn plating: ?5 c to +85 c (no freezing at low temperature) soldering temperature 350 c: within 3 sec. 260 c: with 10 sec. pa rt name material surface treatment fr ame glass-reinforced pbt (ul94v-0) external sleeve brass ni plating on base, sn plating on surface or ni plating on base, au plating on surface internal contact beryllium copper ni plating on base, sn plating on surface ni plating on base, au plating on surface (0.25 m) ni plating on base, au plating on surface (0.76 m) panasonic-electric-works.net/ac
ic sockets axs1 dimensions (unit: mm) ?rib layout (for dil type) the cad data of the products with a cad data mark can be downloaded from: http://panasonic-electric-works.net/ac ?dil solder-dip terminal type dimension table (mm) *1 pitch: 15.24mm *2 pitch: 7.62mm no. of contacts a b c d e 8 10.16 7.62 10.16 7.62 4.3 14 17.78 15.24 10.16 7.62 4.3 16 20.32 17.78 10.16 7.62 4.3 18 22.86 20.32 10.16 7.62 4.3 20 25.4 22.86 10.16 7.62 4.3 22 27.94 25.4 12.7 10.16 6.4 24* 1 30.48 27.94 17.78 15.24 11.2 24* 2 30.48 27.94 10.16 7.62 4.3 28 35.56 33.02 17.78 15.24 11.2 32 40.64 38.1 17.78 15.24 11.2 36 45.72 43.18 17.78 15.24 11.2 40 50.8 48.26 17.78 15.24 11.2 48 60.96 58.42 17.78 15.24 11.2 64 81.28 78.74 25.4 22.86 17.8 1.36 0.1 dia. ?.3 0 c d 0.15 3.1 0.2 4.2 0.2 2.6 0.1 b 0.3 0.5 0.1 dia. 2.54 0.2 2.54 0.1 ?.3 0 a b 0.15 ed note 1) recommended pc board pattern (bottom view) note) rib is not provided for 8, 14 and 16 contacts; 1 rib is provided for 18, 20, 22, 24 and 28 contacts; 2 ribs are provided for 32, 36, 40 and 48 contacts; 4 ribs are provided for 64 contacts. b 0.1 d 0.1 2.54 0.05 0.8 0.05 dia. (hole) cad data 8 to 16 contacts 32 to 48 contacts dimension table (mm) no. of contacts f 8 2.9 14 3.0 16 3.1 dimension table (mm) *1 pitch: 15.24mm *2 pitch: 7.62mm no. of contacts f g 18 3.5 3.0 20 3.5 3.0 22 3.7 3.0 24* 1 4.0 3.2 24* 2 4.2 3.0 28 4.0 3.2 dimension table (mm) no. of contacts h 32 11.5 36 13.5 40 15.5 48 15.5 18 to 28 contacts 64 contacts 4.2 3.5 3.5 h 4.2 4.5 4.5 4 4 4 4 14 42 f f f f g general tolerance: 0.3 panasonic-electric-works.net/ac
ic sockets axs1 ?terminal (common for dil and sil terminals) dip terminal notes ?sil solder-dip type (32 contacts) recommended pc board pattern (bottom view) 1.36 0.1 dia. 0.5 0.1 dia. 2.54 0.2 3.1 0.2 4.2 0.2 2.6 0.1 2.54 2.54 0.1 0 81.28 0.3 78.74 0.15 ?.2 78.74 0.1 2.54 0.1 0.8 0.05 dia. hole (dip type) cad data 0.5 dia. 2.4 3.7 1. do not use for inserting of leads other than of applicable dimension. there is the possibility of distorting the internal contacts. 2. because repeated ?xing of the terminals can lead to the breakage of the terminal, care should be taken. 3. soldering should be done under the following conditions. 260 c: within 10 seconds soldering bath 350 c: within 3 seconds soldering iron 4. flux of the non-corroding rosin type should be used. 5. liquid ?x of minimum chemical action type alcohol can be used. 6. suf?ient care should be taken to prevent ?x from entering the upper surface of the ic socket. 7. for mounting and removing the ic, a special tool for insertion and removal of ic s should be used. for other details, please verify with the product specification sheets. panasonic-electric-works.net/ac
|
